FCI offers circulate switch to protect from dry working

Fluid Components International’s twin alarm FLT93 Series circulate change provides an early warning alert to the potential of dry working circumstances, cavitation and other pump points that may result in emergency shutdowns and expensive maintenance.
The FLT93 Series move swap reliably monitors the flow and temperature of liquids, gases, and slurries. – Image: Fluid Components International
FCI’s FLT93 Series move switch reliably screens the move and temperature of liquids, gases, and slurries. It is designed for pump wet/dry detection, where sudden, unexpected reductions in media move charges can go away pumps weak to over-heating circumstances that shutdown course of traces and require troubleshooting and fixing. The SIL2 rated instrument is intended for heavy-duty, probably hazardous course of business environments and comes with a comprehensive record of global security approvals.
It has a no transferring components design and offers a strong scheme for pump protection with its twin alarm functionality. With Alarm 1, the switch detects a low circulate state of affairs anyplace between 0.01 and three ft per second FPS (0.003–0.9 m per second MPS). This low flow alarm is a pre-warning signal for the control system or operator who can then resolve to keep the pump working or to shut it down.
If an Alarm 2 occurs as a result of the feed line to the pump is running dry, this may be an emergency signal to shut down the pump immediately as a end result of the bearings now see fuel as a substitute of a liquid as a heat switch media. In such situations, the temperature of the bearings could rise very quick. Using เพรสเชอร์เกจ prevents everlasting harm to the pump’s bearings.