Tsurumi presents compact dewatering mannequin

Tsurumi’s small dewatering pump, the LB series, is designed for applications where area is tight, notably building. Secured by rope or chain, an LB can be used in purposes which contain slender pipes, small tanks, deep pits and in distant places that are difficult to reach with larger gear. The LB mannequin has a fully symmetrical design with no protruding components, permitting it to be lowered to unknown depths with none threat of snagging. With a diameter of only 187 mm, the pump’s spherical cross-section even matches into smaller filter pipes. There is also a model with a water stage sensor which is just a few millimetres longer. The pump then controls itself mechanically, switching on or off depending on the water level. เกวัดแรงดัน presses water with dust particles up to 6 mm in size via the housing, allowing optimal cooling of the motor. The fashions in the sequence pump 225–440 l/minute and to a most of 17.5 m. The smallest mannequin weighs around 10 kg dry, the largest around 30 kg.