The term ?dissipation loss? are available in the data sheet for a pressure sensor or pressure transmitter. One needs this specification in order to be in a position to protect the pressure sensor from overheating.
If a pressure sensor is operated in a hot environment, it really is necessary to limit its electrical energy. If one neglects this aspect, one possibly risks an overheating sufficient reason for this, in the worst case, a total failure of the instrument. So how can the correct electrical connection be managed?
Determination of the correct electrical connection on the basis of the dissipation loss
First, the maximum permissible electrical power for the pressure sensor should be known. This is given in the info sheet as the dissipation loss. Please be pressure gauge octa that the dissipation loss could be dependent upon the maximum expected operating temperature of the instrument and must be calculated where necessary.
If the allowable dissipation loss has been determined correctly, then your actual maximum electrical power for the pressure sensor occurring can be determined. The determination can be executed expediently in two steps:
1. Determination of the voltage at the pressure transmitter using the following formula:
UPressure transmitter = UVoltage source ? RLoad � Imax. Current supply
2. Calculation of the maximum electrical power for the pressure transmitter through the next equation:
PPressure transmitter = UPressure transmitter � Imax. Current supply
The maximum electrical energy for the pressure transmitter (PPressure transmitter), that is now known, must be smaller compared to the permissible dissipation loss. If this is actually the case, both the power supply (UVoltage source) and the load (RLoad) were properly calculated and the electrical power of the pressure sensor will be within the permissible range under all operating conditions. Consequently, the pressure transmitter won’t heat too strongly and can withstand the required operating temperatures.
Note
Should you need any advice, your contact will gladly assist you to.